Iron-On Stitchery Tape 3/4" x 75ft

Easiest method to apply hems, facings, appliques, trimmings, etc.  

Instructions:

1. Place iron-on stitchery on fabric between both layers to be fused.  Be sure to cover the Iron-on Stitchery so it only sticks to your fabrics, not the iron or board.

2. With steam iron set on "Wool", press down for 10 seconds using steam & a thin press cloth.  When using dry iron, dampen press cloth.  *Do not slide the iron! just press straight down and lift up*

3. Turn the fabric over & press for an additional 10 seconds

4. Allow to cool for a few minutes.  To test the bond, try lifting one edge.  If necessary, press again for another 5-10 seconds

5. Iron-on Stitchery is completely invisible once heat is applied